Pearl Nano AV inputs
We recommend having up to two video sources added to the custom layout in Pearl Nano's single, full HD channel.
One of the video sources can be either an SRT or an RTSP networked source; however, you cannot connect more than one networked source at the same time. Pearl Nano supports use of common signal converters and input adapters.
Pearl Nano Input Ports
| Input port | Qty | Details |
|---|---|---|
|
SDI1 |
1 |
Linear PCM audio/video input. Supports 12G SDI video input. |
| 4K HDMI2 | 1 | Linear PMC audio/video input, non-HDCP protected. DVI-I (using an adapter) is single link. Supports up to 4K with the optional 4K add-on. Supports 1920´1080 full HD video input without the 4K add-on. For more information, see About 4K on Pearl Nano. |
| USB 3.0 | 2 |
Linear PCM audio inputs on the rear panel accept non-HDCP protected content. Use to connect a single UAC device, such as a USB microphone. Can also connect to external hard drives, flash drives, and control interfaces. USB (UVC) devices are not supported. |
| RJ-45 | 1 | One SRT source over Ethernet at 1920×1080@30 fps. |
| One RTSP source over Ethernet at 1920×1080@30 fps. | ||
| RCA3 | 2 |
RCA consumer line-level audio inputs function as a stereo pair (-10 dBV).
|
|
XLR3 |
2 |
Two XLR audio inputs operate as a stereo pair (left/right) by default.
You can configure the ports to operate as independent mono inputs using the Admin panel, see Configure audio ports for stereo or mono. XLR inputs accept balanced and unbalanced, professional line level signals with a maximum of up to 12.3 VRMS, +24 dBu. |
1 SD-SDI audio is not supported.
2 Requires 4K feature add on
3 In the Admin panel, XLR/RCA includes audio signals from the XLR audio pair and the RCA audio pair by default. You can disable one or the other using the Admin panel, see Assign audio sources to an input.
Only content that is not HDCP-protected is captured from HDMI and SDI sources. HDCP-protected content may appear as a green screen on Pearl Nano.
If you are using DVI2PCIe cards with your Pearl Nano, DVI2PCIe cards do not support audio over HDMI.
