Turn DHCP on or off

In the LiveScrypt device settings, you can turn DHCP on or off. If your network uses a DHCP server to identify devices that are connected to the network, then the LiveScrypt device dynamically obtains an IP address when you power on the device. The network mask and default gateway are also obtained automatically from the network client. DHCP is enabled by default.

This procedure applies to the touch screen and web interface. For instructions on how to access the web interface, see Using the web interface.

To turn DHCP on or off:

1. Select Settings , and then select System to open the System menu.



2. In the Network section, toggle the DHCP switch on or off.



3. Select Apply.