View system status using the front screen menu

Find the serial number, check the installed firmware version of Pearl Nano and more on the System Status screen using the front screen and control key interface.

The System Status screen displays basic system information that's useful when first setting up your Pearl Nano. If you don't see the System status screen displayed on the front screen, press the left arrow key on the control key interface to cycle through the different views.

System status parameters

Label	Description
IP address	The IP address assigned to Pearl Nano. Use this IP address to connect to the Admin panel. To setup networking, see Configure network settings.
Firmware	The firmware that is currently loaded on Pearl Nano.
Uptime	How long Pearl Nano has been powered on displayed as hh:mm.
CPU load	The current amount of CPU load (%).
SD card or SSD	The amount of storage available. SD card only displays if a SATA M.2 2280 SSD is not installed. When an SSD is installed, the field displays SSD instead of SD card.
USB storage	Displays the amount of storage available on a USB storage device that is connected to Pearl Nano.