The front screen Channel view
After you power on the Pearl Nano, the Channel view displays automatically. If you don't see the Channel view displayed on the front screen, press the left arrow key on the control key interface to cycle through the different views.
You can hide the header and footer bars on the Channel view by pressing the check mark key. Press the check mark key again to show the header and footer bars.
Parts of the front screen for the Channel view
| Item | Description |
|---|---|
| 1 | Channel resolution and frame rate. |
| 2 | Channel name. |
| 3 | Preview of the channel video source used for confidence monitoring. If no video source is connected or there is no video signal, the default No Signal screen displays. |
| 4 |
Recording indicator and timer. The recording timer shows the length of time that recording has been in progress. If dashes appear in place of the timer, there is no SD card or SATA M.2 SSD installed and formatted. |
| 5 | Streaming indicator and timer. The streaming timer shows the length of time that streaming has been in progress. If dashes appear in place of the timer, there are no streams configured for the channel. |
| 6 |
Audio VU meter using quasi-peak ballistics with samples averaged every 10 ms. The maximum average audio level in each 100 ms period is displayed using colored bars.
|
