About One Touch streaming and recording

The One Touch feature lets you control both streaming and recording at the same time with the press of a single button. Once enabled, simply press either the Stream control key or the Record control key on the front panel of Pearl Nano to start/stop streaming and recording the channel.

The Record control key glows solid white when an SD card (or SATA M.2 2280 SSD) is installed and the Stream control key glows solid white if there are streams configured for the channel.

The colors of the control keys change when the channel is actively streaming and recording. A flashing control key means there's a problem with the settings for that particular function and the stream (or the recording) did not start.

You can enable and disable One Touch control using the Admin panel when you select Configuration > Front screen or using the front screen menu when you select System > Controls. See Enable One Touch control for details.

The following table describes the One Touch control state changes when you press the Record and Stream buttons on the front panel of Pearl Nano.

Button control when One Touch streaming and recording is enabled

Condition	Button action	Result
Streaming and recording are Off.	Press Stream or Record.	Streaming and recording starts.
Streaming and recording are On.	Press Stream or Record.	Streaming and recording stops.
Streaming is started using the Admin panel and recording is Off.	Press Stream.	Streaming stops.
Streaming is started using the Admin panel and recording is Off.	Press Record.	Recording starts and streaming continues.
Recording is started using the Admin panel and streaming is Off.	Press Stream.	Streaming starts and recording continues.
Recording is started using the Admin panel and streaming is Off.	Press Record.	Recording stops.
While streaming and recording are On, stop recording using the Admin panel.	Press Record.	Recording restarts and streaming continues.
While streaming and recording are On, stop streaming using the Admin panel.	Press Record.	Recording stops (the stream remains stopped)
While streaming and recording are On, stop streaming using the Admin panel.	Press Stream.	Streaming restarts and recording continues.

A storage medium must be installed in Pearl Nano before you can record any content using One Touch control and streaming destinations must already be configured for the channel. For details, see SD card and SATA M.2 2280 SSD storage and Streaming to servers, CDNs, and other devices.