Enable or disable Epiphan Edge access

Epiphan Edge is where you go to remotely manage and control your Pearl-2. Access is enabled on Pearl-2 by default. All you need to do is pair the Pearl-2 to your free Epiphan Edge account for access to your device over the Internet. You can disable Epiphan Edge access on your Pearl-2 from the device screen or using the Admin panel and enable it again later. Access is enabled by default.

Important considerations

  • Unpair the Pearl device from Epiphan Edge before disabling Epiphan Cloud access on the Pearl device using the Admin panel.
  • If you disable Epiphan Edge access while the Pearl device is paired, the device instance in Epiphan Edge goes permanently offline. For more information, see Pair and unpair from Epiphan Edge.

Enable or disable Epiphan Edge access using the Admin panel

  1. Log in as admin, see Connect to the Admin panel.
  2. From the Configuration menu, click Maintenance. The Maintenance page opens.
  3. Uncheck Enable Epiphan Edge to disable the feature or leave it checked to allow the Pearl device to access Epiphan Edge. Click Apply to save your changes.

    4.  

Enable or disable Epiphan Edge access using the touch screen on Pearl-2

  1. Tap the gear icon on the touch screen to open the system Settings screen. If the control icons aren't showing, tap anywhere on the touch screen.
  2. Tap the arrow icon in the lower-right corner of the screen to go to the second Settings page.
  3. Tap Epiphan Edge. The Epiphan Edge settings page shows the status as enabled and displays a pairing code by default.
  4. Uncheck Enable Epiphan Edge to disable the feature or leave it checked to allow the Pearl-2 to access Epiphan Edge.

    5.