Enable an NDI discovery server

You can enable the use of an NDI discovery server on the Pearl-2 using the Admin panel so that the Pearl-2 can more easily discover NDI devices. The network discovery port on the Pearl device is port 5557 and must be enabled to use NDI.

Enable the network discovery port using the Admin panel

1. Log in to the Admin panel as admin, see Connect to the Admin panel.

2. From the Configuration menu, select Network and then select the NDI tab. The NDI Discovery page opens.
3. Enter the address of the NDI discovery server on the network, if adding multiple servers separate them with a comma, then click Apply.