Adjust the fan speed

You can adjust the internal fan speed using the Admin panel. The fan speed is set to Reduced speed by default, and the fan will adjust its speed based on system temperatures. If you see temperatures near 75° C, or higher, we recommend setting the fan speed to the Maximum speed setting. This will increase the static thermal headroom.

Do not operate Pearl-2 at the reduced fan speed for long periods when device temperature is elevated. Lowering the fan speed could reduce the reliability of the equipment.

Adjust the fan speed using the Admin panel

  1. Log in to the Admin panel as admin, see Connect to the Admin panel.
  1. From the Configuration menu, click Maintenance . The maintenance page opens.
  2. Under Fan speed setting, select either Maximum speed or Reduced speed and click Apply.