Network ports used by LiveScrypt

Do not block IP traffic over the default outgoing and incoming network ports that the LiveScrypt device uses. For LiveScrypt to operate properly, make sure your firewall is configured to open the following ports for read/write privileges. Blocking a port will cause the service that uses that port to fail.

Outbound ports:

• HTTP Port 80 - used by the local web admin page.
• HTTPS port 443 - used to communicate with the LiveScrypt cloud transcription service.

Incoming ports:

• TCP port 22 - SSH used for remote support.
• TCP/UDP port 123 - used for NTP time synchronization.